We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Oxygen concentration meter.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Oxygen concentration meter(100) - List of Manufacturers, Suppliers, Companies and Products

Oxygen concentration meter Product List

1～15 item / All 19 items

Displayed results
Zirconia type ppb/ppm/% portable oxygen concentrator OA-1S+

Zirconia type ppb/ppm/% portable oxygen concentrator OA-1S+

A zirconia-based portable oxygen concentrator capable of measuring from 75 ppb to 100% over a wide range!

● An environment free of corrosive and flammable gases ● Wide measurement range of 75 ppb to 100% ● Long-life zirconia oxide sensor ● Measures up to 1000 ppm from the atmosphere in under 30 seconds ● Built-in flow meter and needle valve ● Comprehensive interface (current output, voltage output, range voltage output, RS232C output) ■ The MODEL OA-1S+ is a portable oxygen analyzer capable of measuring a wide range from 75 ppb to 100%. It is equipped with a high-response, long-life zirconia sensor ZR-100. It measures up to 1000 ppm from the atmosphere in under 30 seconds. Users can connect their sampling pipe to the back of the unit to measure oxygen concentration. For more details, please download the catalog or contact us.

  • 図1.png
  • 1外形図OA-1S+.jpg
  • 2外形図OA-1S+.jpg
  • 3外形図OA-1S+.jpg
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zirconia-type portable ppm/% oxygen concentration meter Model OA-1

Zirconia-type portable ppm/% oxygen concentration meter Model OA-1

Portable oxygen concentrator capable of measuring up to ppm /% levels.

● Measurement range: 0.1 ppm to 100% ● In an environment without corrosive or flammable gases ● Operating flow rate: 0.5 to 3.0 L/min ● Measures up to 1000 ppm from the atmosphere with a 95% response in under 5 seconds ● Built-in flow meter and needle valve ● Comprehensive interface (current output, voltage output, range voltage output, RS232C output) ■ The Model OA-1 is a portable oxygen analyzer capable of measuring a wide range from 0.1 ppm to 100%. It is equipped with a high-response, long-life zirconia sensor ZR-100 inside the main unit. It measures up to 1000 ppm from the atmosphere with a 95% response in under 5 seconds. Users can connect their sampling pipe to the back of the unit to measure oxygen concentration. For more details, please download the catalog or contact us.

  • 図1.png
  • 1外形図OA-1.jpg
  • 2外形図OA-1.jpg
  • 3外形図OA-1.jpg
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zirconia-type ppb/ppm/% Oxygen Concentration Meter MODEL 4100

Zirconia-type ppb/ppm/% Oxygen Concentration Meter MODEL 4100

Installation type oxygen concentration meter for ppb/ppm/%! Adopts long-life zirconia oxygen sensor, compact modular type!

● Measurement at ppb level possible in less than 15 minutes from the atmosphere ● Long-life zirconia oxygen sensor ● Monitor interface: RS232, current output, voltage output, range selection voltage output ● Alarm output (upper limit, lower limit, system fault) ● Remote sensor unit ● Large, bright LED, easy operation ■ This is a compact oxygen analyzer for trace oxygen concentration measurement and process control applications. With very high accuracy, fast response, and long-term stability, it provides stable measurements with minimal maintenance for critical applications requiring ppb level oxygen contamination monitoring. ■ In addition to a measurement range from 50 ppb to 100%, it is equipped with a remote sensor module featuring a high-response zirconia sensor manufactured by Neutronics. For more details, please download the catalog or contact us.

  • 図1.png
  • 図1.png
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zirconia-type ppm/% oxygen concentration meter MODEL 3100

Zirconia-type ppm/% oxygen concentration meter MODEL 3100

Installation type ppm/% oxygen concentration meter! Fast response within 10 seconds from air to ppm levels! Equipped with a long-life zirconia oxide sensor!

● High-speed response within 10 seconds from air to ppm levels ● Measurement capability from ppm levels to 100% ● Compact, modular-type analyzer that is small and easy to integrate into equipment ● Monitor interface with RS232, current output, voltage output, and range selection voltage output ● Alarm output (upper limit, lower limit, system fault) ● Remote sensor unit ● Long-life zirconia oxide sensor ■ This is a compact oxygen analyzer featuring a fast-response zirconia oxygen sensor with a measurement range of 0.1 ppm to 100%. It is suitable for measuring various gases and for critical process control applications. ■ The robustly designed sensor enables rapid response to significant changes in oxygen concentration, allowing for accurate measurement of ppm levels within seconds after exposure to air. ■ Equipped with digital output, analog output, and alarm contacts, it can meet various user requirements. For more details, please download the catalog or contact us.

  • 図1.png
  • 図1.png
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dew Point Meters, Oxygen Concentration Meters, and Other Lineup for the Semiconductor Industry

Dew Point Meters, Oxygen Concentration Meters, and Other Lineup for the Semiconductor Industry

Expert in moisture management in gases! A wide range of products including dew point meters, oxygen concentration meters, anemometers, and corrosive gas moisture meters.

Tekune Measurement has been selling dew point meters and other products as experts in moisture management in gases for the past 45 years. We offer a wide range of products, including the online dew point meter "TK-100ON" with a dew point temperature range of -100 to +20°C, the compact galvanic oxygen concentration meter "2001LC," and the temperature and humidity meter "EE310," which can be equipped with Modbus RTU and Modbus TCP options. We provide maintenance and technical support for products from overseas manufacturers domestically, ensuring that our customers can use them with peace of mind through our prompt and accurate support system. Additionally, we will be exhibiting at "Semicon Japan," which will be held from December 14, 2022. Please feel free to contact us for more details. 【Products We Handle (Partial)】 ■ Online Dew Point Meter: TK-100ON ■ Polymer Dew Point Meter: TE-660TR ■ Mirror (Mirror Cooling) Dew Point Meter: MBW973 *For more details, please refer to the PDF document or feel free to contact us.

  • image_204.png
  • image_197.png
  • image_198.png
  • image_199.png
  • image_200.png
  • image_201.png
  • image_202.png
  • image_203.png
  • Wind Speed/Volume Meter
  • Thermo-hygrometer
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zirconia-type ppm/% portable oxygen concentration meter Model Pure N2

Zirconia-type ppm/% portable oxygen concentration meter Model Pure N2

The interface is also rich! A built-in pump type oxygen concentration meter that can measure even in a tank without pressure.

● Measurement range: 0.1ppm to 100% ● Built-in pump ● Suitable for environments without corrosive or flammable gases ● Comprehensive interface (current output, voltage output, range voltage output, RS232C output) ● Long-life zirconia oxide sensor ● Measures from atmospheric levels to 1000ppm with a 95% response in under 5 seconds ■ The MODELPURE N2 is a portable oxygen analyzer with a built-in pump capable of measuring a wide range from 0.1ppm to 100%. ■ It features an integrated design with the sensor built into the main unit, suitable for measuring oxygen concentration in environments free from corrosive or flammable gases and without pressure, applicable from research and development to industrial measurement. For more details, please download the catalog or contact us.

  • 図1.png
  • 外形図1PureN2.jpg
  • 外形図2PureN2.jpg
  • 外形図3PureN2.jpg
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zirconia-type % Oxygen Concentration Meter MODEL 5100

Zirconia-type % Oxygen Concentration Meter MODEL 5100

A panel-mounted oxygen concentrator capable of measuring percentage levels in an environment free of corrosive and flammable gases.

● Compact modular-type analyzer, small size, easy to integrate into equipment ● Monitor interface: RS232, current output, voltage output, range identification voltage output ● Alarm output (upper limit, lower limit, system fault) ● High response speed: under 15 seconds (90%) ● Capable of measuring from 0 to 100% ■ Model 5100 is a cost-effective zirconia oxygen analyzer that can measure oxygen concentration at percent levels in environments free of corrosive and flammable gases. ■ The "Limit Current Zirconia Sensor ZR500" is built into the main unit and connects to the sample line. Additionally, an external sensor model is available as an option.

  • 図３.png
  • 図４.png
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zirconia-type pump-integrated ppm oxygen concentration meter MODEL 7100P

Zirconia-type pump-integrated ppm oxygen concentration meter MODEL 7100P

Measurable in 2 minutes of warm-up! A portable oxygen concentration meter with a built-in pump that can measure up to 1000 ppm in environments free of corrosive and flammable gases.

● Measurable in 2 minutes of warm-up ● Built-in pump ● Compact (main unit) W232×H150×D172 mm, 2.7 kg ● Long-life zirconia oxide sensor ● Almost no maintenance required (no worries about drying or freezing) ● Alarm (upper and lower limits) ● RS-232 serial interface ■ The Model 7100P is a portable oxygen analyzer capable of measuring in the range of 0 to 1000 ppm. The measurement ranges are 0–100 ppm and 0–1000 ppm, with options for auto range or fixed range switching. Measurements can be taken after a 2-minute warm-up. ■ It features a long-life zirconia oxide sensor and requires almost no maintenance, with no concerns about drying or freezing. For more details, please download the catalog or contact us.

  • 図1.png
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Galvani-type battery panel mount Model 201RS/2001RS

Galvani-type battery panel mount Model 201RS/2001RS

Oxygen concentration meter capable of measuring up to % and PPM levels, resistant to combustible gases and organic solvents, using a galvanic cell type.

● Measurement at % and PPM levels ● Galvanic cell-type sensor resistant to combustible gases and organic solvents ● High response speed, long lifespan, and disposable proprietary patented sensor ● Sampling system and solenoid valve included as standard ● Real-time data management via computer ● Data logging function ■ Model 2001RS is an oxygen analyzer capable of measuring from 0 to 10,000 ppm. Model 201RS is an oxygen analyzer capable of measuring from 0.1% to 25%. ■ All operations, including setting the output range, configuring two alarm points, and changing the span during calibration, can be performed from the front panel without removing the oxygen meter from the panel. Additionally, the sensor is a disposable cartridge type, allowing for easy manual replacement from the front panel. For more details, please download the catalog or contact us.

  • sabu.jpeg
  • model-2001rs-01.jpg
  • model-2001rs-02.jpg
  • model-2001rs-03.jpg
  • Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof oxygen concentration meter Model 210BX/2010BX (Galvanic type)

Explosion-proof oxygen concentration meter Model 210BX/2010BX (Galvanic type)

Easy measurement of ppm/% oxygen concentration! Installed intrinsic safety explosion-proof oxygen concentration meter.

● Intrinsically safe explosion-proof certified products (overseas IEC/CSA certified) ● Measurement of percent levels, with 4 range arbitrary output settings (Model 210BX) ● Measurement of PPM levels, with 7 range arbitrary output settings (Model 2010BX) ● Equipped with data logger and sampling system ■ The Model 210BX/2010BX is an oxygen analyzer that allows all operations to be performed from the front panel without removing the main unit from the panel. ■ It is suitable for percent and PPM measurement under conditions requiring explosion-proof products, primarily in the natural gas and petrochemical sectors. ■ In the United States, it boasts a 95% market share in the natural gas and coal seam methane gas industry, with annual sales of 1,000 units. For more details, please download the catalog or contact us.

  • model-2010bx-02.png
  • home-pipe-2010bx-2020-rev03.png
  • model-2010bx-03.png
  • model-2010bx-04.png
  • model-2010bx-05.png
  • model-2010bx-06.png
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Zirconia-type ppm oxygen concentration meter MODEL 7100BE

Zirconia-type ppm oxygen concentration meter MODEL 7100BE

Compact and easy to integrate into equipment! An oxygen concentration meter capable of measuring below 1000 ppm in environments free of corrosive and flammable gases.

● Measurement range: 0 to 1000 ppm ● Enhanced monitoring interface (RS232, current, voltage, range voltage) ● Remote sensor model ● Alarm output (upper limit, lower limit, system fault) ● Long-life zirconia oxide sensor ■ The Model 7100 is an oxygen analyzer capable of measuring in the range of 0 to 1000 ppm. It is a compact oxygen analyzer that uses a long-life zirconia oxide sensor. For more details, please download the catalog or contact us.

  • BE.png
  • ２.png
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pump-integrated oxygen concentration meter unit TKZH007, for glove box use only.

Pump-integrated oxygen concentration meter unit TKZH007, for glove box use only.

Oxygen concentration meter side unit for glove box exclusive model

● Dedicated model for glove boxes ● Galvanic type resistant to combustible gases and organic solvents ● Choose from PPM model or % model ● Minimal leakage due to ALLSUS piping inside the device ● Excellent operability and maintainability ■ This unit can measure oxygen concentration at ppm or % levels depending on the application. It has a built-in flow meter, needle valve, and pump, allowing for easy measurement of ppm level oxygen concentration by simply connecting to the sample IN/OUT. For more details, please download the catalog or contact us.

  • TKZH007全体（背面）.JPG
  • メイン.jpg
  • Other electronic measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Galvani Portable PPM Oxygen Concentration Meter Model 1000RS

Galvani Portable PPM Oxygen Concentration Meter Model 1000RS

Portable ppm oxygen concentration measurement!

● PPM level measurement ● High response speed and long lifespan. Disposable proprietary patented sensor ● Realization of miniaturization - new book size, 2.2 kg ● Data logging function ● International intrinsic safety explosion-proof certification ■ This is a portable oxygen analyzer for PPM measurement that uses a galvanic battery (electrochemical type). ■ It is an ultra-compact portable device equipped with a data logger, needle valve, flow meter, and bypass line as standard in a new book-sized body. ■ The sensor is cartridge-type, so when replacing it, you can simply open the cap on the front panel and replace the cartridge to resume measurements. For more details, please download the catalog or contact us.

  • 1000RS.jpeg
  • model-1000rs-03.jpg
  • model-1000rs-02.jpg
  • Analytical Equipment and Devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Galvani-type remote sensor oxygen concentration meter MODEL 1100 series

Galvani-type remote sensor oxygen concentration meter MODEL 1100 series

It is a panel-mounted type of oxygen concentration meter!

● Compact modular type analyzer, small and easy to integrate into equipment ● Large and bright LED, easy to operate ● Rich monitor interface RS232C, current, voltage, range voltage ● Not affected by hydrogen, methane, sulfide gas, carbon monoxide, carbon dioxide, etc. ■ MODEL 1100 is a galvanic cell type oxygen analyzer that can measure oxygen concentration at percent levels. It can measure in environments where flammable gases are present and is suitable for applications ranging from research and development to industrial measurement. ■ It is a compact panel mount type, allowing for installation on a panel or use as a desktop unit. The oxygen concentration is easily readable on the 3/4 inch 4-digit LED, and various operations such as calibration can be easily performed using the three buttons on the surface. For more details, please download the catalog or contact us.

  • 1100-x544.png
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Galvani-style low-cost oxygen concentrator Model 201LC/2001LC

Galvani-style low-cost oxygen concentrator Model 201LC/2001LC

Low-cost model for OEM oxygen concentration measurement in ppm/%!

● High value-added OEM model inheriting the concept of the 201RS/2001RS series ● Achieves low price ● Small and compact model ● Adopts self-developed galvanic cell type sensor that is resistant to combustible gases and organic solvents ■ Model 201LC/2001LC utilizes the same front panel and digital electronics as Model 2001RS, functioning as an oxygen analyzer for PPM and percent levels. Like other models, it uses our self-developed AMI galvanic cell type (electrochemical) sensor, excelling in basic performance such as response speed, reproducibility, and lifespan. * Compared to the 201RS/2001RS series, it does not have digital communication functions, but there are no differences in measurement range, accuracy, or response speed. ■ The sensor is a disposable cartridge type, allowing for easy manual replacement of the sensor from the front panel. For more details, please download the catalog or contact us.

  • メイン.jpg
  • サブ画像.jpg
  • model-2001lc-02.jpg
  • model-201lc-dimensions.png
  • technology-sensor-render-exploded.jpg
  • panel-mount-cell-block.jpg
  • Other measurement, recording and measuring instruments

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Oxygen concentration meter

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.